Call Us: Servicing Over 300 US Locations
Follow Us:
  • USA Wildlife Removal Education Guide - How to get rid of mold in the attic

How to get rid of mold in the attic

Black mold can grow in many places around the attic and homes; they are mostly found under the roof and can be unsightly when not removed immediately. In order to prevent or remove mold from the attic, you may have to take steps such as roof-framing, decking replacements or mold remediation- these steps are less expensive and can save you the costs of damages caused by molds in the attic. When you allow your attic to be contaminated by mold, the price value of your property goes down, therefore you need to check your attic each time there will be a roof replacement. If you have an old roof at the attic, it is important that you get rid of the mold before replacing the roof with new ones.



Mold remediation companies can be hired for mold removal from the attic, but this can cost you some fortune. You may also handle the removal yourself, but make sure you pay attention to components such as; attic ventilation system, and attic insulation. Mold may develop in some part of the attic when the attic ventilation system is faulty; likewise, when attic insulation is faulty, it needs to be replaced to ensure that molds do not build up once again when the problem has been rectified. Your roof replacement is not complete until new decking boards or plywood are replaced after the old roof of the attic has been removed.

The improper installation of soffit vents along the lower portion of the roof may also cause a gradual buildup of mold in the attic. When you replace the insulator in the attic, make sure it is sealed with plastic foil before the roof alongside its decking are replaced. If you have a small attic area that has been infected by mold, the cost of roof replacement can be expensive, but it is the best possible option when there has been an extensive damages as a result of the mold. Sometimes, decking replacements may be required in place of roof replacement in the attic.

Alternatively, if mold is just beginning to appear in your attic, you can spray with disinfectants before the problem spreads. Though, the use of bleach may also be recommended but it has been discovered that bleaches can weaken some roofs and make them susceptible to future mold attacks. Make sure that there I a proper ventilation system installed after mold removal.

If you need help, we service the entire USA! Click here for a wildlife removal specialist in your town!

Go back to the main Wild Animal Removal page for more information about How to get rid of mold in the attic .
© 2018 Copyright Wildlife Removal USA | Web Design by: